Prepare the Hole Patterns Inputs
Enter row and column counts, spacing, and the starting origin. The generated table lists every point in row-major order.
Bolt Pattern Generator
Generate rectangular bolt-pattern coordinates from rows, columns, spacing, and an origin.
Metrik MFG / Hole PatternsREADY
Bolt Pattern Generator
INPUTVALUEOUTPUT
Primary input01
Process setting02
Generated output03
UTILITY STATUSREADY TO USEEnter values below to generate the output
UTILITY
WORKING TOOL
Bolt Pattern Generator
Advanced Engineering Tool
ABOUT THIS TOOL
How Bolt Pattern Generator fits into the workflow.
Generate a repeatable rectangular hole pattern for fixtures, plates, brackets, and CNC drilling operations.
Where This Output Fits
Use it for fixture layout, drilling patterns, inspection locations, and programming references.
What to Check Before Using It
Starting from the wrong corner or reversing row and column spacing.
ENGINEERING METHOD
How Bolt Pattern Generator generates its output.
METHODX = origin X + column × X spacing. Y = origin Y + row × Y spacing.
RELATED TOOLS
More Tools for This Work
Continue with related engineering and manufacturing utilities.
MANUFACTURING KNOWLEDGE
Related Guides & Articles
Practical information connected to machining, production, materials, tooling, and shop work.
GUIDE / ARTICLE
Why Unit Consistency Matters in Shop Calculations
Mixing inches, millimeters, SFM, RPM, and other unit families is one of the fastest ways to get a believable but wrong result.
GUIDE / ARTICLEBolt Circle Coordinates for CNC Drilling
Generate and verify bolt-circle X and Y coordinates before using a drilling pattern in a CNC program.
GUIDE / ARTICLESurface Finish and Feed Per Tooth
See how theoretical milling roughness changes as feed per tooth and tool diameter change.
GUIDE / ARTICLETap Drill Size: A Practical Starting Calculation
Use the common metric and inch starting relationships for tap-drill selection, then verify against the actual thread standard.
GUIDE / ARTICLEWhat Goes Into a CNC Machine Hourly Rate
Understand the difference between a simple machine rate and a rate that reflects real operating cost.
GUIDE / ARTICLECNC Machining Time: Cycle Time, Setup, and Job Planning
Turn cycle time into a realistic job duration by including setup time and a measured downtime allowance.
GUIDE / ARTICLEHow to Use Tool Life Data Without Guessing
A practical introduction to the Taylor tool-life equation and why its constants must come from real cutting data.
GUIDE / ARTICLEHow to Estimate Material Removal Rate
Learn the simple MRR relationship between feed rate, width of cut, and depth of cut.
GUIDE / ARTICLEFeed Rate vs Chip Load: The CNC Milling Relationship
See how spindle speed, flute count, and chip load combine to produce a milling feed rate.
GUIDE / ARTICLEHow to Calculate CNC Spindle Speed From SFM
A practical explanation of the spindle-speed formula and the inputs that matter before setting CNC RPM.